|
A+ Sample Questions » A+ Core Hardware questions
A+ Sample Questions
A+ Core Hardware practice questions
- SCSI adapters usually don't need drivers, just the devices that interface with them.
- true
- false
Answer :B
- Most SCSI-2 devices will work fine with SCSI-1 adapters.
- true
- false
Answer :A
- Single-ended SCSI or "regular" SCSI has one wire for each signal that needs to be sent along the SCSI bus. Differential SCSI has two wires for each signal that is sent. Differential SCSI cable lengths can be up to 25 meters. How long can single-ended SCSI cables be?
- up to 50 meters
- up to 100 meters
- up to 6 meters
- up to 14 meters
- up to 3 meters
Answer :C
- Your PC has both internal and external SCSI devices connected to one SCSI host adapter. Which devices should be terminated? Select all that apply.
- the last internal device on the chain
- the last external device on the chain
- the host adapter
- the host adapter and one external device
- the PC
Answer :A, B
- How many devices can connect to the typical SCSI adapter? Assume is has only one data connector.
- 7
- 8
- 20
- 10
- depends on whether both internal and external devices are used
Answer :A
- How many devices can be used on a single SCSI bus? Keep in mind that the SCSI host adapter counts as a device.
- 7
- 8
- 20
- 10
- see number 54
Answer :B
- What is the jumper setting on a SCSI device to configure it to use the fourth SCSI id? Remember, SCSI ids start with zero.
- 010
- 110
- 011
- 101
- 001
Answer :C
- Which type of interface provides for the fastest data transfer?
- IDE
- SCSI
- parallel
- serial
- ISA
Answer :B
- In addition to i/o port addresses, SCSI adapters also use a range of rom addresses for their onboard bios.
- true
- false
Answer :A
- SCSI-2 cables have how many pins?
- 40
- 25
- 50
- 72
- 100
Answer :C
« Previous || Next »
A+ Sample Core Hardware Question Number : 1-10 | 11-20 | 21-30 | 31-40 | 41-50 | 51-60 | 61-70 | 71-80 | 81-90 | 91-100 | 101-110 | 111-120 | 121-130 | 131-140 | 141-152
|
|
